 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Schottky barrier diode RSX1001T3 Applications Switching power supply Dimensions (Unit : mm) Structure Features 1) Cathode common type. (TO-220) 2) Low IR 3) High reliability Construction Silicon epitaxial planer (1) (2) (3) Absolute maximum ratings (Ta=25C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current (*1) Forward current surge peak (60Hz / 1cyc) (*1) Junction temperature Storage temperature Symbol VRM VR Io IFSM Tj Tstg Limits 30 30 10 150 150 -40 to +150 Unit V V A A C C (*1)Business frequencies, Rating of R-load, 1/2 Io per diode, Tc=132C Electrical characteristic (Ta=25C) Parameter Forward voltage Reverse current Reverse recovery time Symbol VF IR jc Min. - Typ. - Max. 0.45 500 2.5 Unit V A C/W Conditions IF=5A VR=30 junction to case www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.02 - Rev.B RSX1001T3 Electrical characteristic curves 10 Ta=150 REVERSE CURRENT:IR(uA) FORWARD CURRENT:IF(A) Ta=125 1 Ta=25 Ta=75 Ta=-25 100000 10000 1000 1000000 Data Sheet Ta=150 Ta=125 Ta=75 10000 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) 30 1000 Ta=25 100 10 1 Ta=-25 0.1 100 0.01 0 100 200 300 400 500 600 FORWARD VOLTAGE : VF(mV) VF-IF CHARACTERISTICS 10 0 5 10 15 20 25 0 5 10 15 20 25 30 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS 420 FORWARD VOLTAGE:VF(mV) REVERSE CURRENT:IR(uA) 410 400 350 300 250 200 150 100 50 0 AVE:148.6uA CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25 IF=5A n=30pcs 500 450 1100 Ta=25 VR=30V n=30pcs 1080 1060 1040 1020 1000 980 960 940 920 900 IR DISPERSION MAP Ct DISPERSION MAP AVE:1006.7pF Ta=25 f=1MHz VR=0V n=10pcs 400 390 380 AVE:402.0mV 370 VF DISPERSION MAP 300 250 200 150 100 50 AVE:235.0A 0 IFSM DISPERSION MAP Ifsm 1cyc 8.3ms 30 RESERVE RECOVERY TIME:trr(ns) 25 20 15 10 5 AVE:17.2ns 0 trr DISPERSION MAP 1000 Ta=25 IF=0.5A IR=1A Irr=0.25*IR n=10pcs Ifsm PEAK SURGE FORWARD CURRENT:IFSM(A) 8.3ms 100 8.3ms PEAK SURGE FORWARD CURRENT:IFSM(A) 1cyc 10 1 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 1000 PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm t TRANSIENT THAERMAL IMPEDANCE:Rth (/W) 100 IM=100mA 10 IF=5A 8 DC Sin(=180) D=1/2 10 300us Rth(j-a) FORWARD POWER DISSIPATION:Pf(W) 1ms time 6 100 4 1 Rth(j-c) 2 10 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 0.1 0.001 0.01 0.1 1 10 100 1000 TIME:t(s) Rth-t CHARACTERISTICS 0 0 5 10 15 20 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.02 - Rev.B RSX1001T3 30 0A AVERAGE RECTIFIED FORWARD CURRENT:Io(A) Io AVERAGE RECTIFIED FORWARD CURRENT:Io(A) t VR T D=t/T VR=15V Tj=150 0A 0V t Data Sheet 10 30 Io VR T D=t/T VR=15V Tj=150 8 REVERSE POWER DISSIPATION:PR (W) 0V 20 6 DC 4 Sin(=180) DC D=1/2 20 DC D=1/2 D=1/2 10 Sin(=180) 10 Sin(=180) 2 0 0 10 20 30 REVERSE VOLTAGE : V R(V) VR-PR CHARACTERISTICS 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE:Ta() Derating Curve"(Io-Ta) 0 0 25 50 75 100 125 150 CASE TEMPARATURE:Tc() Derating Curve"(Io-Tc) 30 No break at 30kV 25 ELECTROSTATIC DISCHARGE TEST ESD(KV) No break at 30kV 20 15 10 5 0 C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.02 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RSX1001T310
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |